Ubiquiti nanostration m locom2 2.4ghz 8.5dbi
NanoStation Loco M2 is a very compact outdoor team that integrates 2 antennas (MIMO) of 8 dBi gain for the 2.4 GHz band. The actual transfer speed of the equipment is up to 150 Mbps. Another major advantage is the high transfer speed of the 802.11n standard, thanks to TDMA Time Division Multiplexing technology, it allows to connect to more than 300 customers to the computer. This model has a low latency. Compared to the Nanostration M predecessors, Nano Loco M2 has a processor with a higher clock frequency of 400 MHz and more memory.
Simple and transparent management web.
Some examples of possible configurations can be: AP mode, client or WDS. Traffic Shaping. QoS. A clear or routing bridge between WAN and LAN, with NAT or without NAT. Specific Led to indicate the force of the signal. Output power 23 dBm.
The equipment supports IPv6 in bridge and WDS mode.
It includes the 24V PoE injector needed for power supply, the injector has a reset button, you can use this button to change the device to the recovery mode and upload the firmware to TFTP. Another advantage is that it supports PoE in the secondary ethernet port, which allows it to feed another device. This feature can be disabled through software.
Important compatibility information:
This device uses the new version of AirOS V. firmware For this reason, the device may not be fully compatible with other radio devices. The AirOS system is being continuously improved so it is recommended to always have the firmware updated to the latest version.
Ubiquiti brand | Model NanoStation Loco M2
Characteristics
- Processor: MIPS 24KC, 400MHz
- Memory: 32MB SDRAM, 8MB Flash
- Network interface: 1 × 10 / 100 BASE-TX
- Wireless standards: 802.11 b / g / n
- Frequency band: 2.4 GHz
- Antenna: Integrated 2 × 2 Mimo of 8 dBi, dual polarization
- beam width: H 60 ° / V 60 °
- Through TCP / IP: up to 150Mbit / s
- Transmission power: max. 23dBm + / -2dB in 11b / g, max. 23dBm + / -2dB in 11n
- Range: up to 15 Km
Additional characteristics
- Dimensions: 163x31x80 mm
- Weight: 0.18 kg
- Regulation: FCC Part 15.247, EC, IC RS210, RoHS
- RX sensitivity: min. -83dBm + / -2dB at 11b / g, min. -96dBm + / -2dB at 11n
- Maximum power consumption: 5.5 W
- Power adapter: 24V, 0.5A (12 Watts)
- Power mode: Passive Power over Ethernet (4.5 + thread; 7.8 return)
- Operating temperature: -30 ° C + 80 ° C
-Operation humidity: 5 to 95% with condensation
- Operating system: AirOS V
DANGES
Valuation
There are no ratings yet.